Airline rail, angular, drilled
Length: 1,000 mm
Rail width: 34 mm
Mounting height: 9.6 mm
Hole diameter: 20 mm
Hole/pitch spacing: 25 mm
Material: aluminium - black anodised
Own weight: 530 g
Holes for mounting are already pre-drilled in this airline rail (10 holes at a distance of approx. 100 mm, an 11th hole at a distance of approx. 50 mm; see also third article picture).
Made in Germany
A quality product from allsafeJungfalk.
An important point when mounting an airline rail is the fastening in the underground.
Depending on the nature, material composition and thickness of the substrate, different values can be achieved.
We recommend that you follow the manufacturer's installation guidelines.
The screws must be placed at a distance of 75 mm with a metric grid spacing of 25 mm (76.2 with a 25.4 mm grid)!
Screws with a strength of at least 10.9, with self-locking nut and washer must be installed!
The installer of the load securing equipment is responsible for the installation and the resulting possible load!
Explanation of the ISO and DIN standards:
ISO 29755 = Lashing point standard in passenger cars
ISO 29756 = Lashing point standard in panel vans (transporters)
DIN 75410-1 = Lashing point standard on platform trucks up to 3.5 t
EN 12640 = Lashing point standard on flatbed vehicles from 3.5 t