Front recovery eyes, for VW Bus T5 / T6 (pair)

Suitable for VW Bus T5 and T6
all parts galvanised (thick layer passivated), base part made of C45
replaces original eyelet on the right side and creates new attachment point on the left side
replaces the original recovery eyelet on the right, which is too weakly dimensioned for a recovery manoeuvre
on the left and right an identical bracket is installed, the screw-in eyes are also identical
Brackets C45 galvanised, screw-in eye M16 10.9 thread, red eye forged BL approx. 12t
a guide tube facilitates the mounting of the eyelet (e.g. in the dark)
breaking load approx. 8t/eyelet, depending on the direction of pull, possibly lower
incl. installation instructions
Weight: approx. 2.5 kg

 
Bolting to longitudinal frame at existing holes, drilling only necessary in bumper
Installation time approx. 2 hours
Due to the German TÜV, not to be used while driving on public roads.
Recommendation: always use both eyelets with a V-shaped strap (length 3-4 m and soft shackles, pull strap directly hooked in)
Always load the eyelets in the plane of the eye, never crosswise!
significantly lower load capacity when pulling sideways due to the vehicle construction!
never use rigid traction devices (steel rope, Dyneema rope or similar) for dynamic loading (recovery by jerky pulling)!
Scope of delivery:
- 2 base parts with guide tube for screwing into frame with ring, washer and screw M16
- 2 screw-in eyelets with threaded rod
- 2 rubber caps for hole in bumper