Close filters
 
  •  
  •  
from to
2 From 2
No results were found for the filter!
Casemaker Angle Profile / Basic Profile 22x22mm, 2 meter
Casemaker Angle Profile / Basic Profile...
2 meter frame profile Basic profile to build cupboard boxes Aluminium Planing weight 0,075 kg/lfm Basic price per meter 5,10Euro What do you need for the interior fitting with the Casemaker profile? Not a lot, a mitre saw, a file and a...
€9.90 *
Casemaker Serviceklappen / h-Profil, 2 Meter
Casemaker h-Section for Rack Doors / 2 meter
2 meter frame profile Fits for 6,9mm panel material Aluminium Weight 0,200 kg/lfm Basic price per meter 3,60 Euro
€7.90 *
Casemaker Winkelprofil / Grundprofil 30 x 30 mm, 2 Meter
Casemaker Angle Profile / Basic Profile...
2 meter frame profile Basic profile to build cupboard boxes Aluminium Leg length 30mm each Planing weight 0,121 kg/lfm Basic price per meter 5,85Euro What do you need for the interior fitting with the Casemaker profile? Not a lot, a...
€11.90 *
Casemaker Endprofil / U-Profil, 2 Meter
Casemaker Capping Channel for Dividing Wall /...
2 meter frame profil Fits for 6,9mm panel material Aluminium Weight: 0,039kg/lfm Basic price per meter 2,55 Euro Capping channel / border Do you want to conceal a cutting edge or only border an opening? Then this profile is exactly the...
€5.90 *
Gummidichtungsband, 20 mm, 10 Meter Rolle
Foam Gasket Tape, 20 mm, 10 m Roll
Avoids squealing and clattering Basic price per meter 0,99 Euro The foam gasket tape is usable to adhesive between the Casemaker profile and the vehicle. A smooth transition and no squealing and clattering.
€9.90 *
Stahlseil 300 mm z.B. als Klappenhalter
Steel Cable Lid Stay 300mm
Length app. 300mm Mounting hole diameter app. 5,1 mm Rust-free A folder used as a table? With the steel cable that won´t be any problem
€5.50 *
Aufbauschloss, vernickelt, 69 x 38 mm
Drawbolt medium nickel-plated, 69x38mm
Steel Nickel-plated surface Mounting hole diameter 4,2mm
€1.95 *
100 Stück Multi-Grip Nieten 4,0 x 16,5 mm
100 Multigrip Rivets 4,0 x 16,5mm
Rivet diameter 4mm Rivet length 16,5mm Head diameter 8,2mm Head height 1,4mm Mandrel diameter 2,2mm Clamping width 6,0 - 13,0mm Load capacity (sheering strain) 1200 N Tensile load 1600 N Rivet material aluminium Mandrel material steel...
€15.90 *
Ecke, vernickelt, 22 mm
Case Corner, nickel-plated, 22mm
Corner for Casemaker profile 6109 and 6129 Especially suitable for small boxes
€1.35 *
Klappen-Scharnier, verzinkt
Hinge small galvanised
30mm per wheel Set for one axle Similar to the picture
€1.20 *
Ecke, verchromt, 22 mm
Case Corner cranked for 22 mm, chrome-plated
Corner for Casemaker profile 6109 and 6129
€1.60 *
Hebelverschluss, Metal, Auslöser und Griff bündig, schwarz
Lever Catch, metal, Releaser and Handle is...
Compression Latch Pressure Casting Powder coated 93 x 41 mm With 2 keys A quality handle
€12.90 *
2 From 2
Viewed